Briggs & Stratton 750 DOV Series Dokumentacja Pobierz pdf (Strona 17)

13

1

1

Adjust Armature Air Gap

1. Disconnect spark plug boot (A, Figure 1-

11) and secure away from spark plug.

2. Loosen screw (B) and stud (C).

3. Slide armature (D) away from flywheel.

4. Tighten stud to secure armature.

5. Line up flywheel magnets (E) with

armature.

6. Insert a strip of gauge material (F)

(0.006 - 0.014 in. or 0.15 - 0.36 mm)

between flywheel magnet and both legs of

armature.

7. Loosen stud and allow magnet to pull

armature against gauge (G).

8. Tighten fasteners and torque to values

listed in Section 12 - Engine

Specifications.

9. Rotate flywheel to remove gauge.

Figure 1 - 11

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 77 78

Komentarze do niniejszej Instrukcji

Brak uwag